SHOWER FLOOR SYSTEM Planum ®
The shower water drains through a discrete continuous slot in the planum base into a high capacity drainage tray concealed under the shower floor. This unique and patented technical solution allows for perfectly flat and one-piece shower floors, which can be mounted fl ush with the bathroom floor level. There are no cleaning and maintenance intensive synthetic joints to distract the eye.The thermally isolated shower floor becomes warm in a matter of seconds after turning the shower on resulting in a uniquely comfortable experience.
base plate pleasantly warm when showering
Delivery includes plastic carrier body.
Siphon and covering made of natural stone / artificial stone / porcelain stoneware
The shower floor system mounted flush with the finished floor by means of a recess. The minimum recess required is 8 cm. The waste drainage can be through a siphon with either a vertical (example 1) or horizontal (example 2) exit according to the type of floor construction used. The horizontal exit requires a further 4 cm in the locality of the siphon.
The shower floor system is installed onto the existing floor or screed (example 1).
The shower floor system is located as deep as possible in the given floor construction (example 2). The remaining height (from the finished floor level to the shower floor level) is dressed with an apron to the appropriate height. The necessary height is relative to the floor construction, the location of the waste pipe and the siphon (vertical or horizontal exit).